Step 1.Remove the battery Step 2.Remove the “Retention” cover, on Phillips screw facing up towards the steering neck Step 3.Remove the Phillips screw pointing up to steering neck under the Retention cover Step 4.Remove the Phillips screw in bottom of the battery...
Step 1:Free up the thin harness under the harness retainer plate, this plate just pops out of the bottom of the frame. Step 2:You have verified it is the harness with the 3 wires blue/red/black. Step 3:This is the actual assist sensor you are replacing, behind the...
1) The rear fender on our 2.0 is designed to provide needed clearance so your bike does not plug up with mud. The clearance is adjustable to accommodate various seat heights, and the clamp is designed to swing away should you catch the fender on a tree branch. If...
Do you need another reason to buy an E-bike? Try E-bogganing, the newest way to entertain your kids. Remember how much fun it was tobogganing? How did you like climbing back up the hill? Not so much? Here is the answer, our 500W AMPR’UPs have enough uphill grunt...
Our rack for the AMPRUP2.0 fits fine, and there is a small package of 5 screws and washers that comes with the rack. There is some confusion with the mounting, so here are the instructions to facilitate this. 1) Locate your package of screws and washers in the rack...
